basicnoob.blogg.se - Regit pos cash register error 52

Regit pos cash register error 52 update#
Regit pos cash register error 52 software#
Regit pos cash register error 52 windows#

Follow the on-screen instructions to complete the repair.If you are asked for the location of the installer and you have downloaded the installer from the website, select Browse and then search for the installer's location. Note: If a security warning appears, click Yes. Select your version of Point of Sale and click Repair.

Regit pos cash register error 52 windows#

Click the Windows Start button and click Control Panel or press Windows+ R then type Control Panel and press enter.

Close QuickBooks Desktop Point of Sale.

Regit pos cash register error 52 software#

Note: You may need to have your Point of Sale installation CD or you may need or download the software from your Intuit Account to complete the steps below. Solution 2: Repair templates by repairing Point of Sale

From the Cash Drawer Connection drop down, select the correct setting to match your receipt printer.

From the Receipt Printer drop down, select the correct receipt printer.

Regit pos cash register error 52 update#

Update the Receipt Printer and Cash Drawer Connection preferences to point to the correct receipt printer.From the left pane, select Cash Drawer.(In versions 9 and earlier, choose Edit > Preferences > Workstation.) Choose File > Preferences > Workstation.Solution 1: Ensure to select the correct printer in the preferences Cash drawer is pointing to the wrong printer in your preferences.Receipt printer is cutting the receipt many times before it finishes printing Note: Verify if printing from a windows test page works, if it comes out blank but the self test was fine, this is likely a Windows issue. If it fails, disconnect all connections except the power cord from the printer and try the self-test again.If the self-test print works, the paper is good and the thermal heads are fine.Hold down the feed button and turn the printer back on.Ensure that the paper is inserted in the printer where it feeds form underneath the roll towards the front If it is thermal paper, a scratch with a thumbnail or the edge of a coin will leave a black mark.

Ensure you have a thermal paper loaded properly.

The following can cause this issue to occur: Thermal receipt printer prints blank receipts The cash drawer should now function properly.

Repeat this process for additional copies of the printer that may be installed.

In the Devices and Printers window, right-click the receipt printer, then Remove device.

Solution 5: Remove and reinstall the printer

Click OK and test the cash drawer function.

Click on the Advanced tab, then Print directly to the printer.

In the Devices and Printers window, from the Control Panel, right-click the receipt printer, then Printer Properties.

Solution 4: Bypass the print spooling process

Close this window and test the cash drawer function.

Click the Printer menu again, if Pause Printing is checked, click Pause Printing.

Select X documents in queue, then choose Printer > Cancel All Documents.

Click Devices and Printers, then double-click the receipt printer.

Click the Windows Logo button, choose Control Panel.

Solution 3: Ensure the printer is not paused Do not connect the receipt printer to a USB hub as it will not supply enough power for proper function of the printer.

Solution 2: Ensure that the printer has powerĬheck if the power cord is connected to the printer and there is a power light when switched on.

Once test completes, attempt to print from within Point of Sale again.

When the printer begins its self-test, release the feed button.

Press and hold the feed button and turn the printer back on.

Select Cash Drawer, ensure the Receipt Printer and Cash Drawer Connection are properly configured, and click Open Cash Drawer.

To test the cash drawer from within Point of Sale:

Select Documents & Printers and click Print Test Page.

To test the printer from within Point of Sale: To verify if issue is resolved, test the printer and cash drawer after each numbered step: